Network & Power
Enterprise-grade Wi-Fi that covers the whole property, on equipment protected by conditioned power with remote reboot when something hangs.
The system under the system
Every system in a modern house rides on the network. Cameras, streaming, control, thermostats, and the work calls taken from the back bedroom all share the same pipe, and a router from the carrier is not built to carry them across ten thousand square feet and a pool house.
We design on Access Networks, then protect the rack with WattBox conditioned power and remote reboot.
What we build
Wi-Fi coverage
Wi-Fi designed to the floor plan, with access points placed for real coverage instead of one box fighting through three brick walls.
Wired backbone
A wired backbone to the places that need it: offices, theaters, cameras, and access points, run during rough-in where possible.
Conditioned power
WattBox conditioned power, which cleans up what comes off the line and reboots a device that stops responding without anyone driving over.
A rack you can read
A rack that is labeled, ventilated, and documented, so the next technician in the closet can read it.
Coverage is designed, not guessed
Coverage is a design problem, not a shopping problem. We map the property, count what will be connected, place access points for the square footage and the construction, and pull the cable while the walls are open.
- Coverage plan for house and grounds
- Cable runs during rough-in
- Guest and device separation
- Remote monitoring of the rack
Access Networks and WattBox
Access Networks builds residential networking to a commercial standard, and WattBox keeps the equipment behind it clean and reachable. Together they are the reason a service call often ends without anyone coming out.
Works with
Everything on this list depends on the network underneath it.
Network questions
Let us design your coverage
Send us the plans or tell us where the dead spots are. We will design coverage for the whole property, including the places the carrier router never reached.
